Walking sticks project

I finally got round to straightening some walkng stick shafts I had cut a couple of years back and turning them into walking sticks.
The first one I made was the cherrywood handle with hawthorn shaft.
Next came the thumb stick on ash shaft.
The third was a lady's walking stick with a deer antler/teak handle on a thin hawthorn shaft.
Fourth came the deerantler/cherry handle on a hazel shaft and last , but not least, was the deer antler/teak handle on the stripped ash shaft with pyrography decor - my favourite.

I can make similar at a cost to the buyer of approx. £40 depending on availability and quality of materials.

Summer sailing in the Mediterranean on Explosion

On the 10th of June 2010 I flew from Prestwick to Alicante to join the crew of Explosion on its summer sailing trip from Cadiz to Marseilles via the Balearic islands. Bonno Hylkema is the owner/skipper and I met Bonnno on the yacht delivery I documented at Orust's trip.

The embedded slideshow below is of the photos I took on my trip from Alicante to Ibiza and then Mallorca. The photos of the girls in local costumes were taken at the Fogueres Fiesta in Alicante.

Explosion is a Dynamic 37, built in Denmark and a fast cruiser/racer. Her speciality is closehauled upwind sailing where she excels. The running backstays took getting used to when we tacked but she took us safely through an electric storm on the way to Ibiza and tuna trawlers on the way to Palma. The AIS intergrated with the chart plotter was very useful for the overnight sails to Ibiza and Palma.

The crew comprised Bonno, Folkert, Jaap (to Altea), Robert who were all Dutch and myself - the only Scotsman.
Places we visited after leaving Alicante we sailed past Benidorm and stayed overnight at Altea on the Costa Blanca where we were hosted by Astrid and Folkert for a tapas supper then a tour of the old town and a beer. We left Altea next morning and sailed up the coast to Cabo de la Nao then across to Ibiza where we stayed at the "expensive- €240 per night" Ibiza Marina. We toured the island next day on motobike lunching at Cala d'en Serra. The following morning we headed up the coast to Santa Eularia where we topped up the diesel tanks before heading across to Palma on Mallorca. While in Palma we met Angel Juncosa, who owns a Moody Halberdier like myself, and had an excellent lunch with Angel at the Real Club Nautico de Palma.

I flew home from Palma on the 19th direct to Prestwick.

A wee break in the Highlands

It was my wife's 60th birthday in March so we booked a house at Coylumbridge to take the family and friends away for a week-long party. The house was fabulous with 7 - yes 7 - bathrooms/shower rooms. It also had a sauna for 10 people and log fires in all three lounges. I'd recommend this house for parties of 10 or 12 especially in the skiing season as the house is almost the last house on the road to the Cairngorm ski centre. Have a look at the photos to see some of the pictures I took. We had wonderful day with our grandchildren at the Landmak centre at Carrbridge - there's one of Helen and Rowan on the waterslide. Another photo is of me and Rob on the climbing wall.

Orust en Voyage - June 2009

Delivery of the Malö 36 - ORUST - from Holland to the South of France in June of 2009.
See the following link for the web site I created from the voyage.

Tanking and re-tiling my daughter's shower.

Back in November of 2009 I volunteered to re-do my daughter Helen's shower. Her architect husband spec'd the job and bought the materials and I implemented the design. Here's the photos of the tanking and tiling job I did. The ceramic "floor" tiles Ewan pick for the wall were a pig to cut on my tile cutter. One tile took half a hour to cut. Thanks goodness there was not too many cuts.

Start of 2009 Rolex Middle Sea Race , Malta

I happened to be in Valetta, Malta for the start of the 2009 RMSR. Here are some photos I took at the start. Because I was taking photos from next to the start gun - a full size cannon - I am now deaf in one ear! Enjoy.

The Prince's Rainforests Project

The Prince's Rainforests Project

Shared via AddThis

Kitchen renovation

7/03/2009

Started on the kitchen renovation. Removed all cupboard contents and packed them away in p

lastic/cardboard boxes. Took down wooden shelves, pine cladding on ceiling and wall cabinets and fitted one double wall unit in laundry room to help convert this room into a temporary kitchen. 

11/03/2009

Alno kitchen workmen arrived to remove the remainder of kitchen and replace ceiling which was damaged when

 I originally put up pine cladding. They also altered plumbing and electrics to suit new kitchen. 

13/03/2009

Plasterer arrived today to plaster new Giprock plasterboard ceiling and make good walls.

16/03/2009

Plaster dry enough 

to paint so gave walls and ceiling two coats of white emulsion and Bob , my son, prepared and put one coat of gloss on the woodwork. 

Yacht upgrade

Started this project in spring of 2006. Found Moody Halberdier for sale and decided to go for it. Sold my own Trapper 500 (Rhionnagh) within three weeks of putting her up for sale. Following winter/spring I decided to repaint deck and coamings. Took all winter using high pressure washer to peel existing paint from deck and coamings then luckily we had 5 weeks dry sunny weather in April/May 2007 when I was able to prepare the boat and re-paint the decks, coamings and cockpit. I used International base coat * 2 and Toplac (med white) then Interdeck for the non-slip areas.

During the winter of 2007 the boat took a battering in Troon marina during a storm where her Ampair was ripped off and it took out my radar dome, sprayhood and dented the deck. Took the rest of the off season to effect repairs and install replacement equipment. I also added a new fridge, installed a Webasto heater and replaced the manual windlass with a Lofrans electric windlass and new 10mm calibrated chain.

This spring I've had her topsides resprayed professionally in 2 part acrylic and repainted her wheelhouse roof myself with International Toplac.

16/03/2009

I ordered new boat names in navy vinyl and they arrived last week but since I'm in the middle of renovating the kitchen (see above) I haven't been able to get to the boat to fit them plus the weather has been too wet or cold for me to fit the names on the boat. Just before I started the kitchen last week I managed to spend a day servicing the seacocks on Negresco - there are eight blakes seacocks requiring a yearly clean and grease plus a clean up of the log impellor.

I also tried to set the rigging using a rigging tension measuring device but the mizzen seems to be too far back and with the boat on the hard having a slight aft rake I'm going to have to wait until she's back in the water before I can correct it.

Also I've sold the last of four boat items ( Autohelm radar instrument, clipper wind, Navico radio and Moyle windalss and 60m of 3/8" chain) on Ebay - great fun better than going to the racing at Ayr.

29/3/2009

Re-discovered another three sea cocks to be serviced !! Applied boat names and cove line but I should have waited for a calmer day. The wind wrapped the stern name around my fist as I was applying it and it took 30mins to unwrap it without breaking the vinyl letters !!

I now have Monday and Tues to anti-foul, fit new anodes and polish hull ready for launch on the 1st April - more fool me !

1/4/2009

Decided to augment the bow thruster anode with some extra zinc so took along my optimus stove and a propane/butane torch to melt some pieces of zinc and pour into a sand mould with the old anode in the middle. Seemed to work and now there should be enough zinc to last one or two seasons. Finished just in time before the yard men came to launch the boat.

Rocking horse for granddaughters Christmas

Finished making large rocking horse for granddaughters Christmas on the 19th December. Purchased a plan for rocking horse from The rocking horse shop in August 2008 and finally got round to beginnning the project at the beginning of November 2008. Horse completed by week before Christmas. Bought mane and tail, bridle and stirrup leathers from rocking horse shop - everything else I made (including the eyes). I used an ash tree which I combed from Prestwick beach and topped this up with kiln dried ash from Fairlie sawmill. Hence the title of the associated photo.